OP3: Series designation (4-digit mechanical-digital counter).
A: Viewing/assembling orientation position.
10: Gear ratio/pitch. This indicates a 1.0 mm pitch (or a 10:1 ratio depending on the scale calibration, displaying a value of 0010 after 1 full revolution).
DX: Clockwise rotation direction (increases value when turned clockwise).
F14: Hollow shaft diameter of 14 mm H7.
R: Housing color is Orange (RAL 2004).
P6: Rear lock pin diameter of 6 mm (used to prevent the housing from spinning during operation)
